I want to set up a dual - boot system with Ubuntu.04.
It sounds like you may have win fast line bl tracking missed step 12 13 before.
I went a little bit down this path before deciding it was too much trouble for me, so I stayed.6.7.
Step 2 - Delete the unwanted OS partition and reuse the space (Optional).My System Specs OS windows 7 stinkstink # 8 Brink Stinkstink, Since you can only boot into Windows 7, do steps 8 on in method TWO to add XP back to the boot file.On the left side of EasyBCD, click on the Add New Entry button.I have now two active drives, the one with Windows 8 on it is the boot disk and one with Windows.Press exit from the recovery console, and the system will restart.But Ive always kept the hackintosh install on a bootable USB drive, as I didnt want to mess with the original Windows XP install on the 160GB hard drive.Get Windows installation and recovery media.windows XP install * Now we install Windows XP: Boot with the XP Recovery Console USB stick and format the last partition (should be C use the diskpart command to check) to ntfs.That's it, Shawn # 1 Nikolay Great guide.The OS into which you boot will always assume C for the OS partition, regartdles which OS.Note: You would start at step 9 in that link to finish installing Windows.Now you should have "Freespace" where this partition originally was.
When you get to this point, select the partition (step 2) or hard drive to install Windows.
Other OEMs may do the same, but I was not able to verify that.
Bootrec /FixMbr bootrec /FixBoot bootrec /RebuildBcd Exit the command prompt and restart the computer.
Tutorials Dual Boot Installation with Windows 7 and XP I used to have a computer with Windows XP on which I could use Microsoft Works 2002 "Picture It 7".While youre there in the bios settings, its probably also a good idea to turn off quick boot and quiet boot.I've followed all the steps above but after loading the win xp files and trying to boot into xp i get a msg that says "error loading operating system".To be on the safe side, I used Disk Utility to first erase all data on the HD/SSD, even zeroing out all the data.I recently purchased a 180GB solid state drive (SSD and so I figured this would be the perfect chance to try my hand at an XP/Snow Leopard dual boot system.I was warned by a friend that this was more trouble than its worth, especially since I had a working hackintosh, even if it was by USB stick.In method TWO step 10, check to make sure that you select the drive letter that Windows 7 was installed.A) In Windows 7, select and shrink the Windows 7 volume in Disk Management by how many MB (1024 MB 1 GB) you want to have for this XP partition.